XJ4Ever.com
PO Box 98393
Atlanta, GA 30359-8393
Info@xj4ever.com


Home - Catalog - How-To's - XJBikes.com Forum


SECTION C:

FUEL SYSTEM ITEMS:

--Airbox, Air Filters, Rubber Boots, & Parts


AIRBOX:

HCP549 OEM black plastic AIRBOX, complete bare housing perfectly replaces missing or destroyed original. Does not include air filter, filter lid, ductwork, or any mounting hardware. Fits all XJ550 Maxim models (does not fits 550 Seca models).
$ discontinued

HCP556 OEM black plastic AIRBOX, complete bare housing perfectly replaces missing or destroyed original. Does not include air filter, filter lid, ductwork, or any mounting hardware. Fits all XJ750RL and XJ900RK models.
$ discontinued

HCP6541 OEM airbox filter black plastic LID, fits all XJ750RL and XJ900RK models.
$ 34.95



HCP21442LH OEM airbox GOLDEN CHROME END COVER, left side only. This re-finished original cover perfectly restores the gold finish and look on all XJ650 Midnight Maxim models. A $ 25.00 core charge applies to this item, and a re-usable, same-side 1980-84 XJ650 Maxim end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover.
$ 89.95 + $ 25.00 refundable core charge

HCP21442RH OEM airbox GOLDEN CHROME END COVER, right side only. This re-finished original cover perfectly restores the gold finish and look on all XJ650 Midnight Maxim models. A $ 25.00 core charge applies to this item, and a re-usable, same-side 1980-84 XJ650 Maxim end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover.
$ 89.95 + $ 25.00 refundable core charge



HCP26917LH-RP OEM airbox GOLDEN CHROME UPPER CASE SIDE COVER, left side only. This is the larger side cover that is fitted on the upper “half” of the airbox, and is a re-finished original cover. Perfectly restores the gold finish and look on all XS1100 Midnight Special models (but will fit all XS1100 airboxes). A $ 25.00 core charge applies to this item, and a re-usable, same-side XS1100 end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover. NOTE: most original covers have small (very small) “dimples” visible on the front (shiny) side of the cover where the rear mounting brackets were spot-welded to the cover, and these small dimples are acceptable on returned cores. Also note that these small dimples will be visible on the re-plated covers that you will be purchasing!
$ 99.95 + $ 25.00 refundable core charge

HCP26917RH-RP OEM airbox GOLDEN CHROME UPPER CASE SIDE COVER, right side only. This is the larger side cover that is fitted on the upper “half” of the airbox, and is a re-finished original cover. Perfectly restores the gold finish and look on all XS1100 Midnight Special models (but will fit all XS1100 airboxes). A $ 25.00 core charge applies to this item, and a re-usable, same-side 1980-84 XJ650 Maxim end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover. NOTE: most original covers have small (very small) “dimples” visible on the front (shiny) side of the cover where the rear mounting brackets were spot-welded to the cover, and these small dimples are acceptable on returned cores. Also note that these small dimples will be visible on the re-plated covers that you will be purchasing!
$ 99.95 + $ 25.00 refundable core charge



HCP26919LH-RP OEM airbox GOLDEN CHROME LOWER CASE SIDE COVER, left side only. This is the smaller, wedge-shaped side cover that is fitted on the lower “half” of the airbox, and is a re-finished original cover. Perfectly restores the gold finish and look on all XS1100 Midnight Special models (but will fit all XS1100 airboxes). A $ 25.00 core charge applies to this item, and a re-usable, same-side XS1100 end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover. NOTE: most original covers have small (very small) “dimples” visible on the front (shiny) side of the cover where the rear mounting brackets were spot-welded to the cover, and these small dimples are acceptable on returned cores. Also note that these small dimples will be visible on the re-plated covers that you will be purchasing!
$ 79.95 + $ 25.00 refundable core charge

HCP26919RH-RP OEM airbox GOLDEN CHROME LOWER CASE SIDE COVER, right side only. This is the smaller, wedge-shaped side cover that is fitted on the lower “half” of the airbox, and is a re-finished original cover. Perfectly restores the gold finish and look on all XS1100 Midnight Special models (but will fit all XS1100 airboxes). A $ 25.00 core charge applies to this item, and a re-usable, same-side 1980-84 XJ650 Maxim end cover must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the cover. NOTE: most original covers have small (very small) “dimples” visible on the front (shiny) side of the cover where the rear mounting brackets were spot-welded to the cover, and these small dimples are acceptable on returned cores. Also note that these small dimples will be visible on the re-plated covers that you will be purchasing!
$ 79.95 + $ 25.00 refundable core charge


HCP27090 OEM airbox GOLDEN CHROME AIRBOX SIDE COVERS SET, complete set of 4 covers (left and right uppers and lowers). These re-finished original covers perfectly restores the gold finish and look on all XS1100 Midnight Special models (but will fit all XS1100 airboxes). A $ 100.00 core charge applies to this item, and a re-usable complete set of XS1100 airbox covers must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete, is not bent, dented, or scratched, and has no rust holes or metal pitting on the outer face of the covers. NOTE: most original covers have small (very small) “dimples” visible on the front (shiny) side of the cover where the rear mounting brackets were spot-welded to the cover, and these small dimples are acceptable on returned cores. Also note that these small dimples will be visible on the re-plated covers that you will be purchasing!
$ 339.95 + $ 100.00 refundable core charge




HCP24178 Aftermarket airbox end cap / cover EMBLEM REMOVAL / REPLACEMENT KIT , contains everything you’ll need to remove and then re-install the original used “650” emblems back onto your metal airbox end covers (new emblems already have this tape attached to the rear of the emblem). Typically, when you remove an original emblem for end cover repair or re-chrome, the emblem must be “sawed off” (using the included length of guitar wire) which ruins the original adhesive tape. This kit contains a piece of tape and a fresh, sharp, single-edge razor blade (to trim the tape to a correct shape, which will be necessary on most emblems), as well as a piece of steel guitar wire needed to “saw” thru an attached emblem for initial removal, Each kit can also do one pair of the side cover emblems on the following models: 1981 XJ650 Maxim and Midnight Maxim models. Each:
$ 11.95




AIRBOX HARDWARE:

Airbox-to-frame mounting hardware:

HCP4176 OEM airbox MOUNTING BOLT, secures the airbox to the frame. Fits all the following models and locations, each:
$ 2.95

XJ550 all models (use 3, all positions)
FJ600 all models (use 3, all positions)
XJ650 all models (except Turbo) (use 1, top center)
XJ700 all models (use 2, all positions)
XJ750 all models (use 1, top center)
XJ900RK models (use 3, all positions)


HCP2171 OEM airbox MOUNTING BOLT, secures the airbox to the frame, 6-point hex head alloy steel fastener with a bright zinc-plated finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 2.95

HCP24067 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, 6-point hex head alloy steel fastener with a bright zinc-plated finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 1.25

HCP24077 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, 6-point hex head 18/8 stainless steel fastener with a bright finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 1.75

HCP24078 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, 6-point hex head 316 stainless steel fastener with a bright finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 1.95

HCP6639 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, socket head (hex-key drive) 18/8 stainless steel fastener with a bright finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 1.95

HCP24075 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, socket head (hex-key drive) 18/8 stainless steel fastener with a bright finish. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 2.25

HCP6640 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame, socket head (hex-key drive) black oxide-coated alloy steel fastener. Fits 1982 XJ750 Maxim and 1981-82 XJ750 Seca models on the left side of the airbox, use 1 per box.
$ 1.95



HCP2533 OEM airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Zinc-plated alloy steel hex-head bolt. Each:
$ 1.95

HCP17146 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Zinc-plated alloy steel hex-head bolt. Each:
$ 1.25

HCP17148 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Bright finish 18/8 stainless steel hex-head bolt. Each:
$ 1.50

HCP17147 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Black-oxide coated alloy steel hex-head bolt as original. Each:
$ 1.75

HCP2424 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Black oxide coated alloy steel socket head, allen-key drive bolt. Each:
$ 1.95

HCP80 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Black oxide coated alloy steel socket head, allen-key drive bolt. Features a small nylon thread patch, making this a self-locking bolt. Each:
$ 1.95

HCP2423 Aftermarket airbox MOUNTING BOLT, secures the airbox to the frame. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box. Bright 18-8 stainless steel socket head, allen-key drive bolt. Each:
$ 1.50



HCP315 OEM airbox LOCK WASHER, for use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 2.95

HCP916 Aftermarket zinc-plated alloy steel with a natural finish airbox LOCK WASHER, for use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 1.25

HCP319 Aftermarket 18-8 stainless steel airbox LOCK WASHER, for use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 1.50

HCP321 Aftermarket black oxide-coated alloy steel airbox LOCK WASHER, for use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 1.75



HCP4254 OEM airbox FLAT WASHER, for use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 2.95



HCP4175 OEM airbox CAPTURED NUT, use with the HCP2533 bolt above. Fits all XJ650 models (except Turbo), 1983 XJ750 Seca, and all 1983-84 XJ750 Maxim models on the left side of the airbox, use 1 per box.
$ 5.50



HCP13548 OEM airbox mounting peg bracket RETAINING SCREW, secures the HCP13546 and HCP13547 side cover mounting pegs to the airbox. Fits all XJ550 and 1984-85 FJ600 models, use 1 screw per peg, each:
$ discontinued

HCP24420 Aftermarket airbox mounting peg bracket RETAINING SCREW, secures the HCP13546 and HCP13547 side cover mounting pegs to the airbox. Fits all XJ550 and 1984-85 FJ600 models, use 1 screw per peg, each:
$ 2.95



Airbox side covers-to-airbox mounting hardware:

HCP848 OEM airbox side end covers RETAINING SCREW, secures the chrome end cap covers to the airbox. Fits all XJ650 Maxim and Midnight Maxim models, use 2 per cover, each:
$ 1.95

HCP1203 Aftermarket airbox side end covers RETAINING SCREW, made from an 18/8 stainless steel material, secures the chrome end cap covers to the airbox. Fits all XJ650 Maxim and Midnight Maxim models, use 2 per cover, each:
$ 1.25


HCP4168 OEM airbox side end covers RETAINING SCREW, bright zinc-plated alloy steel. Secures the end cap covers to the airbox. Fits all XJ700 and XJ750-X models, use 2 per cover, each:
$ 2.95

HCP25892 Aftermarket airbox side end covers RETAINING SCREW, bright 18-8 stainless steel. Secures the end cap covers to the airbox. Fits all XJ700 and XJ750-X models, use 2 per cover, each:
$ 1.95



HCP4167 OEM airbox side end covers RETAINING SCREW, alloy steel with a dark finish. Secures the end cap covers to the airbox. Fits all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per cover, each:
$ 1.95

HCP21391 Aftermarket airbox internal partition plate SCREW, stainless steel with a bright finish. Uses 2 per airbox on the left side to secure the partition plate to the upper case. For all XJ1100 models. Each:
$ 1.25



HCP3625 OEM airbox side end covers retaining screw FLAT WASHER, bright zinc-plated alloy steel. Fits all XJ700 and XJ750-X models, use 2 per cover, each:
$ 2.95

HCP914 Aftermarket airbox side end covers retaining screw FLAT WASHER, bright zinc-plated alloy steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP1353 Aftermarket airbox side end covers retaining screw FLAT WASHER, bright 18/8 stainless steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP65 Aftermarket airbox side end covers retaining screw FLAT WASHER, black oxide-coated stainless steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.95



HCP2512 OEM airbox side end covers retaining screw FLAT WASHER, dark finish, alloy steel. Fits 1983-84 XJ750 Maxim and Midnight Maxim models, and all 1981-83 XJ750 Seca models, use 3 per cover, each:
$ 1.95

HCP914 Aftermarket airbox side end covers retaining screw FLAT WASHER, zinc-plated alloy steel. Fits 1983-84 XJ750 Maxim and Midnight Maxim models, and all 1981-83 XJ750 Seca models, use 3 per cover, each:
$ 1.00

HCP1353 Aftermarket airbox side end covers retaining screw FLAT WASHER, bright 18/8 stainless steel. Fits 1983-84 XJ750 Maxim and Midnight Maxim models, and all 1981-83 XJ750 Seca models, use 3 per cover, each:
$ 1.00

HCP65 Aftermarket airbox side end covers retaining screw FLAT WASHER, black oxide-coated stainless steel. Fits 1983-84 XJ750 Maxim and Midnight Maxim models, and all 1981-83 XJ750 Seca models, use 3 per cover, each::
$ 1.95



Airbox filter lid-to-airbox mounting hardware:

HCP4172 OEM airbox filter lid RETAINING SCREW, panhead phillips-drive, alloy steel with a bright zinc-plated finish, secures the filter lid to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.95


HCP6566 Aftermarket airbox filter lid RETAINING SCREW, panhead phillips-drive, alloy steel with a bright zinc-plated finish, secures the filter lid to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.75

HCP6568 Aftermarket airbox filter lid RETAINING SCREW, panhead phillips-drive, 18/8 stainless steel with a bright zinc-plated finish, secures the filter lid to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.75


HCP2512 OEM airbox filter lid retaining screw FLAT WASHER, dark finish, alloy steel, secures the filter lid to the airbox. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.95

HCP914 Aftermarket airbox filter lid retaining screw FLAT WASHER, zinc-plated alloy steel. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.00

HCP1353 Aftermarket airbox filter lid retaining screw FLAT WASHER, bright 18/8 stainless steel. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.00

HCP65 Aftermarket airbox filter lid retaining screw FLAT WASHER, black oxide-coated stainless steel. Fits all XJ550 and 1984-85 FJ600 models, use 4 per lid, each:
$ 1.95




HCP314 OEM airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. Zinc-plated alloy steel, panhead, phillips-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each:
$ 3.95

HCP5335 OEM airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. Black alloy steel, panhead, phillips-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid. Originally used on XJ650 Midnight Maxim and XJ750 Midnight Maxim models. Each:
$ 2.95

HCP915 Aftermarket airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. Zinc-plated alloy steel, panhead, phillips-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each:
$ 1.95

HCP316 Aftermarket airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. 18-8 stainless steel, panhead, phillips-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each.
$ 1.95

HCP317 Aftermarket airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. 18-8 stainless steel with a polished button head, hex-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each:
$ 2.50

HCP318 Aftermarket airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. 18-8 stainless steel with a smooth, polished socket head, hex-drive. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each.
$ 2.50

HCP320 Aftermarket airbox filter lid RETAINING SCREW, secures the filter lid to the airbox. Black-oxide coated alloy steel with a ribbed socket head. Fits all XJ650 (except Turbo) and all XJ750 models, use 3 per lid, each:
$ 1.95



HCP2173 OEM airbox filter lid retaining screw FLAT WASHER, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, original bright finish, each:
$ 1.95

HCP6642 Aftermarket airbox filter lid retaining screw FLAT WASHER, zinc-plated alloy steel with a natural finish, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, each:
$ 0.95

HCP6643 Aftermarket airbox filter lid retaining screw FLAT WASHER, 18-8 stainless steel with a natural finish, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, each:
$ 1.25

HCP25756 Aftermarket airbox filter lid retaining screw FLAT WASHER, 316 stainless steel with a natural finish, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, each:
$ 1.95

HCP14285 Aftermarket airbox filter lid retaining screw FLAT WASHER, black oxide-coated 18-8stainless steel, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, each:
$ 1.95

HCP14284 Aftermarket airbox filter lid retaining screw FLAT WASHER, black-oxide coated hardened alloy steel, secures the filter lid to the airbox. Fits all XJ650 (except Turbo) and all 1981-84 XJ750 models (except 1984 XJ750RL Seca), use 3 per lid, each:
$ 2.95



HCP4173 OEM airbox filter lid RETAINING SCREW, this panhead, phillips-drive, bright zinc-plated alloy steel screw secures the filter lid to the airbox. NOTE: the original screw has an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ700 and XJ750-X models, use 3 per lid, each:
$ 3.95

HCP24144 Aftermarket airbox filter lid RETAINING SCREW, this panhead, phillips-drive, bright 18/8 stainless steel screw secures the filter lid to the airbox. NOTE: the original screw has an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ700 and XJ750-X models, use 3 per lid, each:
$ 1.95


HCP306 OEM airbox filter lid retaining screw FLAT WASHER, bright zinc-plated alloy steel. Secures the filter lid to the airbox. Fits all XJ700 and XJ750-X models, use 3 per lid, each:
$ 1.95

HCP914 Aftermarket airbox filter lid retaining screw FLAT WASHER, bright zinc-plated alloy steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original captured washer present on the original screw, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP1353 Aftermarket airbox filter lid retaining screw FLAT WASHER, bright 18/8 stainless steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original captureded washer present on the original screw, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP65 Aftermarket airbox filter lid retaining screw FLAT WASHER, black oxide-coated stainless steel. Fits all XJ700 and XJ750-X models, use 2 per cover. NOTE: this washer is slightly smaller and thinner than the original captureded washer present on the original screw, but this change will make no difference in fitment nor function. Each:
$ 1.95



HCP2264 OEM airbox filter lid RETAINING SCREW, panhead phillips-drive alloy steel with a bright zinc-plated finish. Secures the filter lid to the airbox. Fits all XJ750RL and XJ900RK models, use 3 per lid, each:
$ 2.95

HCP2781N Aftermarket airbox filter lid RETAINING SCREW, panhead phillips-drive alloy steel with a bright zinc-plated finish. Secures the filter lid to the airbox. Fits all XJ750RL and XJ900RK models, use 3 per lid, each:
$ 1.50

HCP231N Aftermarket airbox filter lid RETAINING SCREW, panhead phillips-drive 18/8 stainless steel with a bright finish. Secures the filter lid to the airbox. Fits all XJ750RL and XJ900RK models, use 3 per lid, each:
$ 1.95

HCP24070 Aftermarket airbox filter lid RETAINING SCREW, panhead phillips-drive 316 stainless steel with a bright finish. Secures the filter lid to the airbox. Fits all XJ750RL and XJ900RK models, use 3 per lid, each:
$ 2.50




Airbox miscellaneous mounting hardware:

HCP848 OEM airbox base bracket RETAINING SCREW, secures the cinching bracket to the base housing on all XJ650 Turbo models. Use 2 per airbox, each:
$ 1.95

HCP1203 Aftermarket airbox base bracket RETAINING SCREW, made from an 18/8 stainless steel material, secures the cinching bracket to the base housing on all XJ650 Turbo models. Use 2 per airbox, each:
$ 1.25


HCP8639 OEM airbox base bracket screw FLAT WASHER. For all XJ650 Turbo models, use 1 per screw, each:
$ 2.95





HCP21389 Aftermarket airbox lower-to-upper case SCREW, uses 6 per airbox, in all bottom positions except at the right front corner position. This is the short screw. For all XJ1100 models. Each:
$ 2.50

HCP21389SET6 Aftermarket airbox lower-to-upper case SCREW, set of 6:
$ 8.95


HCP21388 Aftermarket airbox lower-to-upper case SCREW, use 1 per airbox, at the right front corner position. This is the long screw. For all XJ1100 models. Each:
$ 3.95


HCP4168 OEM airbox internal oil separator tube system RETAINING SCREW, bright zinc-plated alloy steel. Secures the separator to the upper airbox case. Fits all XJ1100 models, use 2 per bike, each:
$ 2.95

HCP25892 Aftermarket airbox internal oil separator tube system RETAINING SCREW, bright 18-8 stainless steel. Secures the separator to the upper airbox case. Fits all XJ1100 models, use 2 per bike, each:
$ 1.95



HCP3959 OEM airbox internal partition plate SCREW, uses 2 per airbox on the left side to secure the partition plate to the upper case. For all XJ1100 models. Each:
$ 1.95

HCP21391 Aftermarket airbox internal partition plate SCREW, uses 2 per airbox on the left side to secure the partition plate to the upper case. For all XJ1100 models. Each:
$ 1.25


HCP4172 OEM airbox left side filter access cover RETAINING SCREW, panhead phillips-drive, alloy steel with a bright zinc-plated finish, secures the filter cover to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ1100 models, use 2 per cover, each:
$ 1.95

HCP6566 Aftermarket airbox left side filter access cover RETAINING SCREW, panhead phillips-drive, alloy steel with a bright zinc-plated finish, secures the filter cover to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ1100 models, use 2 per cover, each:
$ 1.75

HCP6568 Aftermarket airbox left side filter access cover RETAINING SCREW, panhead phillips-drive, 18/8 stainless steel with a bright zinc-plated finish, secures the filter cover to the airbox. NOTE: the original screw has a dark finish with an integral flat washer. This replacement screw no longer has the captured washer, and a replacement washer should be ordered from the choices below. Fits all XJ1100 models, use 2 per cover, each:
$ 1.75


HCP2512 OEM airbox left side filter access cover screw FLAT WASHER, dark finish, alloy steel, use with the HCP4172 screw above. Fits all XJ1100 models, use 2 per lid, each:
$ 1.95

HCP914 Aftermarket airbox left side filter access cover screw FLAT WASHER, zinc-plated alloy steel. Fits all XJ1100 models, use 2 per lid, each:
$ 1.00

HCP1353 Aftermarket airbox left side filter access cover screw FLAT WASHER, bright 18/8 stainless steel. Fits all XJ1100 models, use 2 per lid, each:
$ 1.00

HCP65 Aftermarket airbox left side filter access cover screw FLAT WASHER, black oxide-coated stainless steel. Fits all XJ1100 models, use 2 per lid, each:
$ 1.95



HCP3699 OEM airbox INTERNAL CAPTURED NUT, fits inside the lower case to accept the HCP4172 left side filter access cover screws. Black finish. Use 2 per airbox, for all XJ1100 models.
$ 2.95

HCP10961 Aftermarket airbox INTERNAL CAPTURED NUT, fits inside the lower case to accept the HCP4172 left side filter access cover screws. Yellow zinc-plated finish. Use 2 per airbox, for all XJ1100 models.
$ 1.25



HCP1030 OEM airbox forward/upper mounting bracket MOUNTING SCREW, dark finish alloy steel, panhead, phillips drive. Use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. Each:
$ 1.95

HCP2922 Aftermarket airbox forward/upper mounting bracket MOUNTING SCREW, use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. Zinc-plated alloy steel, natural finish, panhead phillips-drive, each:
$ 1.50

HCP21362 Aftermarket airbox forward/upper mounting bracket MOUNTING SCREW, use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. 18/8 stainless steel, bright finish, panhead phillips-drive, each:
$ 1.50

HCP6714 Aftermarket airbox forward/upper mounting bracket MOUNTING SCREW, use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. Button head hex-drive, 18-8 stainless steel, bright finish, each:
$ 1.50

HCP6715 Aftermarket airbox forward/upper mounting bracket MOUNTING SCREW, use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. Socket head, hex-drive, black-oxide coated alloy steel, each:
$ 1.75

HCP6716 Aftermarket airbox forward/upper mounting bracket MOUNTING SCREW, use 2 per bracket. This screw is also used with the left side right-angle mounting bracket for the upper screw position. For all XJ1100 models. Socket head, hex-drive, 18-8 stainless steel, bright finish, each:
$ 1.95



HCP315 OEM airbox forward/upper mounting bracket screw LOCK WASHER, use with the screw above. Fits all XJ1100 models. Each:
$ 2.95

HCP916 Aftermarket airbox forward/upper mounting bracket screw LOCK WASHER, use with the screw above. Zinc-plated alloy steel. Fits all XJ1100 models. Each:
$ 1.25

HCP319 Aftermarket airbox forward/upper mounting bracket screw LOCK WASHER, use with the screw above. 18-8 stainless steel. Fits all XJ1100 models. Each:
$ 1.50

HCP321 Aftermarket airbox forward/upper mounting bracket screw LOCK WASHER, use with the screw above. Black-oxide coated alloy steel. Fits all XJ1100 models. Each:
$ 1.75



HCP2171 OEM airbox left side mounting bracket MOUNTING BOLT, 6-point hex head alloy steel fastener with a bright zinc-plated finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 2.95

HCP24067 Aftermarket airbox left side mounting bracket MOUNTING BOLT, 6-point hex head alloy steel fastener with a bright zinc-plated finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 1.25

HCP24077 Aftermarket airbox left side mounting bracket MOUNTING BOLT, 6-point hex head 18/8 stainless steel fastener with a bright finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 1.75

HCP24078 Aftermarket airbox left side mounting bracket MOUNTING BOLT, 6-point hex head 316 stainless steel fastener with a bright finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 1.95

HCP6639 Aftermarket airbox left side mounting bracket MOUNTING BOLT, socket head (hex-key drive) 18/8 stainless steel fastener with a bright finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 1.95

HCP24075 Aftermarket airbox left side mounting bracket MOUNTING BOLT, socket head (hex-key drive) 18/8 stainless steel fastener with a bright finish, fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 2.25

HCP6640 Aftermarket airbox left side mounting bracket MOUNTING BOLT, socket head (hex-key drive) black oxide-coated alloy steel fastener. Fits all XJ1100 models. This fastener fits the bracket in the side (horizontal) position. Use 1 per bracket. Each:
$ 1.95



HCP2173 OEM airbox left side mounting bracket bolt FLAT WASHER, used with the HCP2171 bolt above. For all XJ1100 models, original bright finish, each:
$ 1.95

HCP6642 Aftermarket airbox left side mounting bracket bolt FLAT WASHER, zinc-plated alloy steel with a natural finish. For all XJ1100 models, each:
$ 0.95

HCP6643 Aftermarket airbox left side mounting bracket bolt FLAT WASHER, 18-8 stainless steel with a natural finish. For all XJ1100 models, each:
$ 1.25

HCP25756 Aftermarket airbox left side mounting bracket bolt FLAT WASHER, 316 stainless steel with a natural finish. For all XJ1100 models, each:
$ 1.95

HCP14285 Aftermarket airbox left side mounting bracket bolt FLAT WASHER, black oxide-coated 18-8 stainless steel,. For all XJ1100 models, each
$ 1.95

HCP14284 Aftermarket airbox left side mounting bracket bolt FLAT WASHER, required for use with any of the aftermarket mounting bolts listed above. Black-oxide coated hardened alloy steel. For all XJ1100 models, each:
$ 2.95




AIR FILTER ELEMENTS:

af1) Air filters are available in a variety of styles to fit the original factory airbox, but still, we have to ask:

Filter, filter in that hole,
Who's the fairest of them all?:

http://www.motorcycleproject.com/text/air_filters_more.html

and

http://www.motorcycleproject.com/text/powersports_air_filters.swf


- OEM and aftermarket stock PLEATED PAPER AIR FILTER ELEMENT. Original factory and reproduction air filter elements lets your engine breathe all the good, clean air it deserves. Dirty, oil or fuel soaked elements dramatically reduce the flow of air into the engine, thus resulting in a very rich fuel mixture to the carbs. Aftermarket stock type elements look, fit, and perform just like the factory filters, although some versions may have molded plastic end cases rather than the thin stamped sheetmetal caps as on OEM filters.

Yamaha specifies a service life for stock pleated-paper air filter elements under "normal" conditions as being approximately 15,000 miles.

- Aftermarket K&N high-flow, re-usable HIGH-PERFORMANCE AIR FILTER ELEMENT. Made from 4-6 layers of a tough cotton gauze material bonded between aluminum retainer screens, K&N air filters flow more air than stock pleated paper filters, and can be cleaned, re-oiled, and re-used almost indefinitely, while also fitting inside your stock airbox. Each filter contains two 15ml tubes of filter oil and cleaning/re-oiling instructions. You normally WILL have to re-jet your carbs when replacing a stock paper element with a K&N filter, but individual situations will vary. Always check your plug insulator colors after installing any intake or exhaust modifications to insure proper mixture conditions and settings!

NOTE: all K&N filters come un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below.

- Aftermarket UNI re-usable FOAM AIR FILTER ELEMENT. Made from an open-cell polyurethane foam material, these filters flow more air than stock pleated paper filters, can be cleaned, re-oiled, and re-used almost indefinitely, and fit inside your stock airbox. As contrasted with K&N filters, you normally will NOT have to re-jet your carbs when replacing a stock paper element with a UNI foam filter, but individual situations will vary. Always check your plug insulator colors after installing any intake or exhaust modifications to insure proper mixture conditions and settings!

NOTE: all UNI filters come un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below.


for all XJ550 and 1986-90 YX600 Radian models:

HCP689 OEM pleated-paper stock AIR FILTER, fits all XJ550 and 1986-90 YX600 Radian models.
$ 49.95

HCP1218 Aftermarket pleated-paper stock style AIR FILTER, fits all XJ550 and 1986-90 YX600 Radian models.
$ 29.95

HCP1212 Aftermarket K&N HIGH FLOW AIR FILTER, fits all XJ550 and 1986-90 YX600 Radian models:
$ 89.95

HCP6474 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, fits all XJ550 and 1986-90 YX600 Radian models:
$ 49.95


HCP17795 Aftermarket coarse foam airbox vent FILTER PUCK, fits all XJ550 Seca models. Proper grade and sized foam disc fits inside the vent in the bottom of the airbox housing, correctly replacing a typically missing or disintegrated original filter. This filter and its installation can be reviewed at: www.xjbikes.com/forums/index.php?threads/31872
$ 13.95

HCP28312 Aftermarket foam airbox vent filter pick RETAINER, fits all XJ550 Seca models. This is the circle with the “crosshairs” that fits into the bottom and the top of the rubber suction tube, and retains the HCP17795 filter puck. Uses 2 per tube. Each:
$ 9.95



for all 1984-85 FJ600 models:

HCP19847 OEM pleated-paper stock AIR FILTER, fits all 1984-85 FJ600 and 1984-90 XJ600 Euro models.
$ 44.95

HCP20120 Aftermarket pleated-paper stock style AIR FILTER, fits all 1984-85 FJ600 and 1984-90 XJ600 Euro models.
$ 32.95

HCP20254 Aftermarket K&N HIGH FLOW AIR FILTER, fits all 1984-85 FJ600 and 1984-90 XJ600 Euro models:
$ 89.95

HCP20252 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, fits all 1984-85 FJ600 and 1984-90 XJ600 Euro models:
$ 49.95


HCP15020 Aftermarket frame tube AIR CLEANER INLET WARNING DECAL, yellow decal with black English and Japanese text cautions that the air intake area should not be obstructed. Note that the word "AREA" on the decal is mis-spelled as "ARER" just like on the original. Used on all 1984-85 FJ600, XJ700, and XJ750-X models on the air box lid shield, and on 1981-83 XJ750 models on the left upper frame tube just above the TCI unit, facing straight upwards.
$ 8.95



for all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models:

HCP19467 OEM pleated-paper stock style AIR FILTER, fits all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models.
$ 64.95

HCP8653 Aftermarket pleated-paper stock style AIR FILTER, fits all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models.
$ 39.95

HCP20255 Aftermarket K&N HIGH FLOW AIR FILTER, fits all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models.
$ 89.95

HCP20253 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, fits all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models.
$ 49.95


HCP6395 OEM airbox filter lid FOAM SEAL, fits into a small channel cast into the upper airbox filter case ("lid") and the top round air filter lid. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace these seals every few years as it tends to get collapsed and crushed over time. The main airbox requires a 36" length of this seal, while the lid use a 20" length of seal. You will need to order two of these 48” length seals to do an entire airbox. Fits all 1992-98 XJ600 Seca II and 1992-2002 XJ600 Euro models. Each:
$ 12.95

HCP26472 Aftermarket airbox filter lid FOAM SEAL, a single 20" length of seal is long enough to fit into the small channel cast into the upper airbox filter case lid-to-divider ("lid"). Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all 1992-1998 XJ600 Seca II and 1992-2002 XJ600 Euro models. Each:
$ 5.95

HCP18374 Aftermarket airbox filter housing FOAM SEAL, a single 36" length of seal is long enough to fit into the small channel cast into the airbox filter case. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all 1992-1998 XJ600 Seca II and 1992-2002 XJ600 Euro models. Each:
$ 9.95



for all XJ650 (except Turbo) and 1981-83 XJ750 models:

HCP690 OEM pleated-paper stock AIR FILTER, fits all XJ650 (except Turbo) and all 1981-83 XJ750 models.
$ 49.95

HCP1219 Aftermarket pleated-paper stock style AIR FILTER, fits all XJ650 (except Turbo) and all 1981-83 XJ750 models.
$ 27.95


NOTE: on the following two K&N filters----for the XJ650 (except Turbo) and XJ750 models---we offer two different size K&N filters:

a) the "standard" K&N filter designated for these models, part HCP1213. This filter is tiny compared to the size of the stock Yamaha paper filter element and airbox for these models....about 40% of the original size, at most. We're not really sure why K&N specifies such a small filter for these models, but they do!

b) an "oem-sized" Super K&N filter, part HCP6478. This is actually a larger K&N filter (which is the same size and shape as the stock Yamaha paper filter) that has been modified to properly fit into the stock 650/750 airbox. This filter will give you the absolute maximum airflow possible while still using a stock filtered airbox intake system.


HCP1213 Aftermarket K&N HIGH FLOW AIR FILTER, for all XJ650 (except Turbo) and all 1981-83 XJ750 models, small size.
$ 89.95

HCP6478 Aftermarket K&N HIGH FLOW AIR FILTER, for all XJ650 (except Turbo) and all 1981-83 XJ750 models, full oem size.
$ 99.95


HCP6475 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, for all XJ650 (except Turbo) and all 1981-83 XJ750 model:
$ 49.95



HCP15020 Aftermarket frame tube AIR CLEANER INLET WARNING DECAL, yellow decal with black English and Japanese text cautions that the air intake area should not be obstructed. Note that the word "AREA" on the decal is mis-spelled as "ARER" just like on the original. Used on all FJ600, XJ700, and XJ750-X models on the air box lid shield, and on 1981-83 XJ750 models on the left upper frame tube just above the TCI unit, facing straight upwards.
$ 8.95



for all XJ650 Turbo models:

HCP18424 Aftermarket washable foam style AIR FILTER, fits all XJ650 Turbo models. Using the OEM filter frame, a brand new re-usable/washable foam filter sleeve is fitted in place of the pleated paper core, resulting in a replacement filter that will last close to a lifetime. Foam filter must be periodically cleaned and re-oiled. NOTE: filter comes un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below. NOTE: a refundable core charge of $ 50.00 applies to this item, and a re-usable, same-model filter element must be returned for the core charge to be refunded. NOTE: "re-usable" means it is complete and has not been physically damaged in any way, in particular the plastic housing cannot be modified, damaged, or chewed up in any way. As an alternative solution, you can send in your original filter element to us for modification, and we will replace the paper filter media with a new foam core and in this way, you can avoid paying the up-front core charge (this service requires 1-2 weeks for service and delivery). Includes the HCP18450 filter seal.
$ 89.95 + refundable $ 50.00 core charge

HCP18450 Aftermarket air filter element FOAM SEAL, this adhesive-backed foam seal fits onto the bottom of the plastic filter element and forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ650 Turbo models.
$ 16.95


HCP19569 Aftermarket coarse foam surge tank drain valve FILTER PUCK, fits all XJ650 Turbo models. Fits within the drain valve cover and filters the air that is drawn in during pressurized operation. Typically missing or horribly disintegrated.
$ 13.95

HCP18445 Aftermarket surge tank drain valve cover GASKET, fits all XJ650 Turbo models. Fits the metal drain valve cover and prevents leaks. NOTE: the OEM paper gasket was made from a standard duty, graphite impregnated paper material. Our aftermarket hi-performance gasket is designed to slightly swell in the presence of petroleum products (fuel or oil), thus creating a super-tight, leak-proof flange seal.
$ 11.95



for all XJ700 and XJ750-X models:

HCP692 OEM pleated-paper stock AIR FILTER, fits all XJ700 and XJ750-X models.
$ 69.95

HCP5786 Aftermarket K&N HIGH FLOW AIR FILTER, for all 1985-86 XJ700 and XJ750-X models:
$ 89.95

HCP6476 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, for all 1985-86 XJ700 and XJ750-X models:
$ 49.95


HCP6542 OEM airbox filter lid FOAM SEAL, fits into a small channel cast into the bottom of the airbox filter lid which forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ700, XJ750-X, and XJ750RL, XJ900RK, RL, N/FN, and F models.
$ 12.95

HCP18373 Aftermarket airbox filter lid FOAM SEAL, fits into a small channel cast into the bottom of the airbox filter lid which forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ700 and XJ750-X models.
$ 9.95


HCP15020 Aftermarket frame tube AIR CLEANER INLET WARNING DECAL, yellow decal with black English and Japanese text cautions that the air intake area should not be obstructed. Note that the word "AREA" on the decal is mis-spelled as "ARER" just like on the original. Used on all FJ600, XJ700, and XJ750-X models on the air box lid shield, and on 1981-83 XJ750 models on the left upper frame tube just above the TCI unit, facing straight upwards.
$ 8.95


HCP10624 OEM fuel tank rear RUBBER SHROUD, fits to the rear and below the fuel tank rear mounting plate. This is the flexible, long plastic “flap” that attaches to the rear mounting pad (via 2 rubber “pins”) and to the sides of the frame. For use on all XJ700 and XJ750-X models.
$ discontinued

HCP22905 Aftermarket fuel tank rear RUBBER SHROUD, fits to the rear and below the fuel tank rear mounting plate. This is the flexible, long plastic "flap" that attaches to the rear mounting pad (via 2 rubber "pins") and to the sides of the frame and prevents air turbulence and water intrusion into the airbox. For use on all XJ700 and XJ750-X models. NOTE: you will find this seal much easier to install if you lubricate (silicone grease or spray, dish soap, etc.) the two rubber "pegs" on the rear gas tank mount cushions that pop into and thru the two center holes in this shroud. Don't pull on those rubber pegs too hard or you'll break them off!
$ 24.95



for all XJ750RL, XJ750E-II, and XJ900 models:

HCP693 OEM pleated-paper stock AIR FILTER, fits all XJ750RL, XJ750E-II, XJ900RK, RL, N/FN, and F models.
$ 47.95

HCP1222 Aftermarket pleated-paper stock style AIR FILTER, fits all XJ750RL, XJ750E-II, XJ900RK, RL, N/FN, and F models.
$ 29.95

HCP5740 Aftermarket K&N HIGH FLOW AIR FILTER, for all XJ750RL, XJ750E-II, XJ900RK, RL, N/FN, and F models:
$ 89.95


HCP6542 OEM airbox filter lid FOAM SEAL, fits into a small channel cast into the bottom of the airbox filter lid which forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ700, XJ750-X, XJ750RL, XJ750E-II, and XJ900RK, RL, N/FN, and F models.
$ 12.95

HCP19575 Aftermarket airbox filter lid FOAM SEAL, fits into a small channel cast into the bottom of the airbox filter lid which forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ750RL, XJ750E-II, and XJ900RK, RL, N/FN, and F models.
$ 9.95



for all XJ1100 models:

HCP694 OEM pleated-paper stock AIR FILTER, fits all XJ1100 models.
$ 69.95

HCP24132 Aftermarket air filter element FOAM SEAL, this adhesive-backed rectangular foam seal fits onto the bottom of the filter’s metal housing and forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ1100 models.
$ 13.95

HCP6395 OEM airbox filter lid FOAM SEAL, fits into a small channel cast into the upper airbox filter case ("lid"), the lower airbox filter base, and the left side opening for the ornamental cover. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace these seals every few years as it tends to get collapsed and crushed over time. You will need to order two of these 48” length seals to do an entire airbox. Fits all XJ1100 models. Each:
$ 12.95

HCP18374 Aftermarket airbox filter lid FOAM SEAL, a single 36" length of seal is long enough to fit into the small channel cast into the upper airbox filter case lid-to-divider ("lid") or the lower airbox filter base-to-divider. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. You will need to order one of these seals to do either the upper lid or the bottom case (in other words, 2 of this length seal to do both both areas). Fits all XJ1100 models. Each:
$ 9.95

HCP19577 Aftermarket airbox filter lid FOAM SEAL, a single 12" length of seal is long enough to fit into the small channel cast into the side of the lower airbox filter base, where the left side ornament attaches. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ1100 models. Each:
$ 3.95

HCP19578 Aftermarket airbox filter lid FOAM SEAL, a single 86" length of seal is long enough to re-do the entire airbox. Forms the air-tight seal that prevents air from entering the intake system without going thru the filter element. Good idea to replace this seal every few years as it tends to get collapsed and crushed over time. Fits all XJ1100 models. Each:
$ 13.95



HCP18401 OEM coarse foam airbox vent FILTER PUCK, fits all XJ1100 models. Fits within the round hole in the central partition plate, and thus "filtering" the air that is used to equalize pressure between the upper and lower sections of the airbox unit. Typically missing or horribly disintegrated: http://www.xs11.com/forum/showthread.php?p=491746
$ discontinued

HCP22413 Aftermarket coarse foam airbox vent FILTER PUCK, fits all XJ1100 models. Fits within the round hole in the central partition plate, and thus "filtering" the air that is used to equalize pressure between the upper and lower sections of the airbox unit. Typically missing or horribly disintegrated: http://www.xs11.com/forum/showthread.php?p=491746
$ 11.95



for all XS1100 models:

HCP21754 OEM pleated-paper stock style AIR FILTER, fits all XS1100 models.
$ 59.95

HCP20518 Aftermarket pleated-paper stock style AIR FILTER, fits all XS1100 models.
$ 32.95

HCP20519 Aftermarket K&N HIGH FLOW AIR FILTER, for all XS1100.
$ 59.95

HCP20517 Aftermarket UNI washable foam HIGH FLOW AIR FILTER, for all XS1100 models.
$ 47.95

HCP24191 Aftermarket air filter element FOAM SEAL, each of these adhesive-backed ovaloid foam seal fits onto either the top and the bottom of the filter’s metal housing and forms an air-tight seal to the airbox. Prevents air from entering the intake system without going thru the filter element. Good idea to replace these seal every few years as it tends to get collapsed and crushed over time. Fits all XS1100 model stock or aftermarket filters. Each:
$ 11.95


Other models:

Aftermarket airbox filter system FOAM SEAL, various length of the round sponge-core foam seals used to seal up airbox base-to-lid or the air filter lids or covers. These seals tend to collapse or deteriorate over time, allowing un-filtered air into the intake system, and should be replaced periodically. Measure your original seals or lids to determine the proper lengths for your applications. Use on all of the following models:

1982-83 XS400 RJ/RK rectangular filter cover (left side)
1988 and 1990 FZR400 base housing to top and small round filter lid
1982-83 XZ550 large rectangular filter lid
1986-88 FZ600 t-shaped filter lid
1989-90 FZR600 base housing to top and small round filter lid
1992-98 XJ600 Seca II base housing to top and the small round filter lid
1992-2002 XJ600 Euro base housing to top and the small round filter lid
1986-87 FZX700 for filter lid
1987 FZ700 round filter lid
1985-86 and 1988 FZ750 round filter lid
1987-88 FZR750 round filter lid
1981-82 XV750 Virago rectangular filter cover (left side)
1983 XV750 Midnight Virago rectangular filter cover (left side)
1981-82 XV920RH Virago rectangular filter cover (left side)


HCP19577 foam seal 12” length
$ 3.95

HCP26472 foam seal 20” length
$ 5.95

HCP18374 foam seal 36” length
$ 9.95

HCP26473 foam seal 48” length
$ 12.95

HCP19578 foam seal 86” length
$ 17.95




HIGH-FLOW POD AIR FILTERS:

NOTE: although free-flow air filters sound like a great idea at first glance, just be aware that increasing the amount of airflow through an engine is going to cause you to spend quite a bit of "trial and error" time in re-jetting your carbs to get the engine to perform correctly. And by "quite a bit", we mean A LOT OF TIME. Definitely not plug-and-play:



And not all pods are created equal.....it will be to your benefit to understand this expose:

http://www.caferacer.net/forum/technical/19639-pod-filter-thread-geeto.html

Yoji himself cautions against it:

http://xjbikes.com/forums/index.php?attachments/mikuni-article-jpg.15101


In addition, there are a few other drawbacks to pod air filters: they are susceptible to odd wind conditions. Crosswinds, or even the normal airflow around your engine can disturb the airflow going into the carbs. Some bikes don't have the problem, other bikes have lots of problems with this issue. And one other significant consideration is rain----if you ride in rainy weather, the water can soak your pod filter elements and leave you on the side of the road!


Available in a number of different brands and styles:

- Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Made from 4-6 layers of a tough cotton gauze material bonded between aluminum retainer screens, K&N individual "pod" air filters flow much more air than almost any other style air filter or media available, and can be cleaned, re-oiled, and re-used almost indefinitely. Each set of 4 pod filters comes with a small tube of filter oil and cleaning/re-oiling instructions. You absolutely will have to re-jet your carbs when replacing a stock paper element with pod filters! Always check your plug insulator colors after installing any intake or exhaust modifications to insure proper mixture conditions and settings!

NOTE: all K&N filters come un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below.


- Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Made from a special high density open-cell polyurethane foam material, UNI filters feature a higher air flow rate than stock paper filters, and can be cleaned, re-oiled, and re-used almost indefinitely. Each set of 2 pod filters comes with cleaning/re-oiling instructions. You absolutely will have to re-jet your carbs when replacing a stock paper element with pod filters! Always check your plug insulator colors after installing any intake or exhaust modifications to insure proper mixture conditions and settings!

NOTE: all UNI filters come un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below.


- Aftermarket Emgo brand high-flow HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Made with a tough wire-mesh outer screen over a paper filter material, Emgo individual "pod" air filters flow much more air than the stock air filter/airbox units. Short, tapered design features chrome lids and bases. You absolutely will have to re-jet your carbs when replacing a stock paper element with these pod filters! Always check your plug insulator colors after installing any intake or exhaust modifications to insure proper mixture conditions and settings!

NOTE1: Emgo filters do not appear to be washable, so once they get dirty, you must replace them. Their "filtering" ability is marginal at best.

NOTE2: Emgo filters will not fit XJ550 models, as the Mikuni carbs used on these models have such a small carb throat center-to-center spacing that the wide base flanges on Emgo filters will interfere with each other.


for all XJ550 and FJ600 models:

HCP17535 Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome filter covers. Fits all XJ550 models. Complete set of 2 "dual-pods" units, enough to do all four carbs. NOTE: due to the very close spacing of the XJ550 carbs, these “pod” filters are not 4 individual filters (as is common on all other models); rather, it is two “joined” or “siamesed” filter elements (and oval lids). Each “pod unit” thus attaches to and services 2 carbs, but looks (externally) like a single unit.
$ 179.95


HCP1665 Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all FJ600, XJ600 Seca II, all XJ650 (except Turbo), XJ700 air-cooled engines, and 1981-84 XJ750 models. Will also fit XJ700-X and XJ750-X models very tightly (those models can use either this set or the larger HCP1666 pod filter set listed below). Complete set of 4 pods:
$ 189.95


HCP7547 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all XJ550 (tightly; the top chrome caps will rub against each other when installed), all XJ650 (except Turbo), all XJ700 non-X, and all 1981-83 XJ750 models. One set of 2 pods:
$ 79.95

HCP7547SET2 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Two sets of 2 pods each does one complete carb rack:
$ 139.95



for XJ650 (except Turbo), XJ700, and XJ750 models:

HCP1665 Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all FJ600, all XJ650 (except Turbo), XJ700 air-cooled engines, and 1981-84 XJ750 models. Will also fit XJ700-X and XJ750-X models very tightly (those models can use either this set or the larger HCP1666 pod filter set listed below). Complete set of 4 pods:
$ 189.95

HCP1666 Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all XJ700-X and XJ750-X water-cooled models, XJ900RK, RL, N/FN, and F models, and XJ1100 models (XJ700-X and XJ750-X models can use either this set or the smaller HCP1665 pod filter set listed above). Complete set of 4 pods:
$ 199.95



HCP7547 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all XJ550 (tightly; the top chrome caps will rub against each other when installed), all XJ650 (except Turbo), all XJ700 non-X, and all 1981-83 XJ750 models. One set of 2 pods:
$ 79.95

HCP7547SET2 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Two sets of 2 pods each does one complete carb rack:
$ 139.95



HCP1738 Aftermarket Emgo brand high-flow HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Fits all XJ650 (except Turbo), XJ700 models, and XJ750 models. One filter does one carb. Each:
$ 17.95

HCP1738SET4 Aftermarket Emgo brand high-flow HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Set of 4:
$ 59.95




for all XJ900, XJ1100, and XS1100 models:

HCP6510 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models. One set of 2 pods:
$ 69.95

HCP6510SET2 Aftermarket UNI brand high-flow, re-usable FOAM HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Two sets of 2 pods each does one complete carb rack:
$ 129.95


HCP1666 Aftermarket K&N brand high-flow, re-usable HIGH PERFORMANCE POD AIR FILTER ELEMENTS, with polished chrome end caps. Fits all XJ700-X and XJ750-X water-cooled models, XJ900RK, RL, N/FN, and F models, XS1100, and XS1100 models (XJ700-X and XJ750-X models can use either this set or the smaller HCP1665 pod filter set listed further above). Complete set of 4 pods:
$ 199.95


HCP5739 Aftermarket Emgo brand high-flow HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Fits all XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models with the MIKUNI carbs. One filter does one carb. Each:
$ 14.95

HCP5739SET4 Aftermarket Emgo brand high-flow HIGH PERFORMANCE POD AIR FILTER ELEMENTS. Set of 4:
$ 57.95



NOTE: all of the pod filters listed above come with a bright-plated "worm screw" flange ring clamp that is used to secure the pod to the carb intake throat. For an upgraded look, you can use this stock style "screw cinching" type of ring clamp for a more "factory" look!

HCP566 OEM pod air filter flange RING CLAMP, fits all of the pod air filters listed above, bright plated finish, each:
$ 14.95

HCP566SET4 OEM pod air filter flange RING CLAMPS, set of 4:
$ 57.95


HCP16431 Aftermarket pod air filter flange RING CLAMP, fits all of the pod air filters listed above, black finish, each:
$ 12.95

HCP16431SET4 Aftermarket pod air filter flange RING CLAMPS, set of 4:
$ 49.95




af73) Aftermarket crankcase oil breather FILTER ELEMENTS. When you replace your stock air filter box system with "pod" filters, you also lose your stock crankcase oil breather system (since it normally vents oil vapors back into the stock filter airbox). The stock vent system runs from a breather nipple on the engine block (XJ550 and XJ1100 models) on the back upper corner of the shifter side cover (all others) via a rubber hose to a plastic nipple on the airbox.

Rather than just allow these vents to blow off into the atmosphere, these aftermarket washable and re-usable VENT FILTERS---available in either a push-in (to the existing rubber hose) or a clamp-on (to the existing vent nipple) style---solve this problem in an attractive and simple way.

The clamp-on breather fits directly onto the engine case or shifter cover vent nipple, and thus can be used on all XJ-series bikes. It comes with a worm-screw type clamp.

The push-in style breather fits onto the original rubber breather hose, and has a mounting "tab" flange to allow it to be fastened to some fixed object (to prevent it from bouncing around).

NOTE: all UNI filters come un-oiled and should be oiled prior to first use. Filter oil and cleaner products are listed further below.


HCP9795 Aftermarket crankcase breather VENT FILTER, push-in style fits into the stock breather rubber vent hose.
$ 21.95

HCP9796 Aftermarket crankcase breather VENT FILTER, clamp-on style fits onto the stock breather rubber vent nipple.
$ 21.95





AFTERMARKET RE-USABLE AIR FILTERS CLEANER AND OILS:

af33) All of the aftermarket fabric (K&N) or foam UNI filter elements need to be periodically cleaned and re-oiled. Our AIR FILTER CLEANER and AIR FILTER OIL products help keep your filter flowing freely and promote not only their proper filtering ability, but are also necessary to assure the longest filter life.

NOTE: the following product(s) can only be shipped via ground transport (which thus eliminates the postal Priority Mail, postal Express Mail, or private carrier Expedited levels of service for this item) and cannot (and will not----don't even ask!) be shipped outside of the continental USA. Additionally, there may be a per-package weight or quantity restriction, and thus multiple-unit orders of this product may have to be shipped in separate packages and will incur additional shipping charges.

HCP10377 Aftermarket AIR FILTER CLEANER, large 19-oz. aerosol spray can be used with both foam or fabric filter elements.
$ 12.95

HCP10375 Aftermarket FABRIC AIR FILTER ELEMENT OIL, large 15-oz. aerosol spray can, for K&N filters.
$ 10.95

HCP10376 Aftermarket FOAM AIR FILTER ELEMENT OIL, large 20-oz. aerosol spray can, for UNI filters.
$ 12.95




AIR CLEANER BOX-TO-CARB RUBBER BOOTS & RELATED:

af3) OEM and aftermarket original-reproduction airbox-to-carb rubber JOINT or BOOT, both original and reproduction individual boots and complete sets are offered to allow you to replace cracked, dry-rotted, melted or stiff-as-a-proverbial-board originals. If these boots aren't flexible, you're going to have a fight on your hands when you go to re-install your carbs! And if they're leaking, they will upset the air flow into your carb(s), not only making carb-tuning efforts difficult or impossible, but also allowing dirty, unfiltered air into your carbs and cylinders. These are the boots that run from the air cleaner box to the rear of the carbs!

http://xjbikes.com/forums/index.php?threads/30444


Also, be aware that using straight pieces of plumbing hose as a "low-cost substitute" for these formed boots may not be such a good idea:

http://xjbikes.com/forums/index.php...f-a-bike-repair-noob.40743/page-3#post-357582


ALSO---it's never a bad idea to use some of our 100% Silicone Grease as an "assembly lube" when installing any of these airbox boots (around the inside of the lip where the carbs enter the boots, as well as the outer edge of the boot where it fits into the airbox opening):

HCP28407 Aftermarket o-ring, oil seal, and gasket installation pure SILICONE GREASE. This small 5-gram (1/6-oz) snap-open "pillow packet" is enough for a few small oil seals, dozens of o-rings, and the like. Each:
$ 4.95

HCP1714 Aftermarket o-ring, oil seal, and gasket installation pure SILICONE GREASE. This generous 14-gram (1/2-oz.) tub goes a long way, because just like Brylcreem, "just a little dab will do ya'!" Each:
$ 9.95



NOTE: the following product(s) can only be shipped via ground transport (which thus eliminates the postal Priority Mail, postal Express Mail, or private carrier Expedited levels of service for this item) and cannot (and will not----don't even ask!) be shipped outside of the continental USA. Additionally, there may be a per-package weight or quantity restriction, and thus multiple-unit orders of this product may have to be shipped in separate packages and will incur additional shipping charges.

HCP20861 Aftermarket industrial-strength SILICONE LUBE, in a large 16-ounce aerosol can. Concentrated silicone sprays on wet, and then dries to a super-slick, clear, non-greasy, non-staining finish. Resists moisture, stops squeeks, prevents binding on all types of surfaces (wood, metal, plastic, rubber, even fabrics). Won't wash away, protect against rust and corrosion, stable from -100 degrees up to 500-F. This fluid is also a great choice for use as installation lubricant for o-rings, oil seals, etc. (similar to our HCP1714 or HCP28407 silicone grease paste) or wherever petroleum-based lubricants are not recommended.
$ 24.95



XJ550 and YX600 Radian models:

HCP558 OEM airbox-to-carb rubber BOOT, for all XJ550 models and 1986-90 YX600 Radian models, each:
$ 27.95

HCP558SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ 109.95


HCP1204 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XJ550 models and 1986-90 YX600 Radian models, each:
$ 24.95

HCP1204SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 99.95



HCP565 OEM airbox rubber boot metal RING CLAMP, for all XJ550, XJ650 (except Turbo), all XJ700 air-cooled, and all XJ750 air-cooled models, black finish as original, includes the cinching screw, each:
$ 11.95

HCP565SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 46.50


HCP16432 Aftermarket airbox rubber boot metal RING CLAMP, for all XJ550, 1992-98 XJ600 Seca II, 1992-2002 XJ600 Euro, XJ650 (except Turbo), XJ700 air-cooled, and all XJ750 air-cooled models, black finish, includes the cinching screw, each:
$ 10.95

HCP16432SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95




HCP24034 OEM airbox rubber boot metal RING CLAMP, used on all 1986-90 YX600 Radian models, includes the cinching screw, each:
$ 29.95

HCP24034SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 109.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6061 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6061SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6062 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.95

HCP6062SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6063 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6063SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6064 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel, original small-head JIS screw. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 2.95

HCP6064SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 11.25


HCP6646 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.50

HCP6646SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



1984-85 FJ600, 1986-89 XJ600 Euro, and 1986-88 FZ600 models:

HCP19846 OEM airbox-to-carb rubber BOOT, fits on the #1 and #4 carbs (left and right outer positions) only on all 1984-85 FJ600 and 1986-91 XJ600 Euro models, each:
$ discontinued

HCP19850 OEM airbox-to-carb rubber BOOT, fits on the #2 and #3 carbs (inner carbs positions) only on all 1984-85 FJ600 and 1986-91 XJ600 Euro models, each:
$ discontinued


HCP25882 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all 1984-85 FJ600 and 1984-91 XJ600 models for the #1 and #4 (outer) carb positions, each:
$ 32.95

HCP25883 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all 1984-85 FJ600 and 1984-89 XJ600 models for the #2 and #3 (inner) carb positions, each:
$ 32.95

HCP25886 Aftermarket airbox-to-carb rubber BOOTS SET, exact reproduction of the original, for all 1984-85 FJ600 and 1984-89 XJ600 models, contains 2 each of the outer and inner boots.
$ 124.95




HCP24029 OEM airbox-to-carb rubber BOOT, for all 1986-88 FZ600 models, each:
$ discontinued

HCP24029SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ discontinued



HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1986-91 XJ600 Euro, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95


HCP24030 OEM airbox rubber boot metal RING CLAMP, used on all 1986-88 FZ600 models, includes the cinching screw, each:
$ discontinued

HCP24030SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ discontinued



HCP16431 Aftermarket airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1986-88 FZ600, 1986-91 XJ600 Euro, XJ650 Turbo (surge tank-to-carb boots), XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, black finish as original, includes the cinching screw, each:
$ 10.95

HCP16431SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.


HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XJ600 Seca II models:

HCP26557 OEM carbs sheet-rubber HEAT SHIELD, flexible rubber die-cut sheet fits over the top of the carb set (over and around the airbox boot throats) and acts as a heat and dust/water shield. Fits all 1992-98 XJ600 Seca II and 1996-2002 XJ600 Euro models. Each:
$ 52.95

HCP26904 Aftermarket carbs sheet-rubber HEAT SHIELD, flexible rubber die-cut sheet fits over the top of the carb set (over and around the airbox boot throats) and acts as a heat and dust/water shield. Fits all 1992-98 XJ600 Seca II and 1996-2002 XJ600 Euro models. Each:
$ 32.95



HCP22351 OEM airbox-to-carb rubber BOOT, for all 1992-98 XJ600 Seca II models, each:
$ 18.95

HCP22351SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ 71.95


HCP2894 OEM airbox rubber boot metal RING CLAMP, used on all 1992-98 XJ600 Seca II models, bright plated finish, includes the cinching screw, each:
$ 13.95

HCP2894SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 49.95


HCP16432 Aftermarket airbox rubber boot metal RING CLAMP, for all XJ550, 1992-98 XJ600 Seca II, 1992-2002 XJ600 Euro, XJ650 (except Turbo), XJ700 air-cooled, and all XJ750 air-cooled models, black finish, includes the cinching screw, each:
$ 10.95

HCP16432SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95




These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6061 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6061SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6062 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.95

HCP6062SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6063 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6063SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6064 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel, original small-head JIS screw. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 2.95

HCP6064SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 11.25


HCP6646 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.50

HCP6646SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XJ650 (except Turbo) models:

HCP559 OEM airbox-to-carb rubber BOOT, for all XJ650 (except Turbo) models, each:
$ 29.95

HCP559SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ 119.95


HCP1205 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XJ650 (except Turbo) models, each:
$ 25.95

HCP1205SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 99.95



HCP565 OEM airbox rubber boot metal RING CLAMP, for all XJ550, XJ650 (except Turbo), all XJ700 air-cooled, and all XJ750 air-cooled models, black finish as original, includes the cinching screw, each:
$ 11.95

HCP565SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 46.50


HCP16432 Aftermarket airbox rubber boot metal RING CLAMP, for all XJ550, 1992-98 XJ600 Seca II, 1992-2002 XJ600 Euro, XJ650 (except Turbo), XJ700 air-cooled, and all XJ750 air-cooled models, black finish, includes the cinching screw, each:
$ 10.95

HCP16432SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95




These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6061 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6061SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6062 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.95

HCP6062SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6063 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6063SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6064 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel, original small-head JIS screw. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 2.95

HCP6064SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 11.25


HCP6646 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.50

HCP6646SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XJ650 Turbo models:

Airbox-to-Surge Tank Boots and Hardware:

HCP7224 OEM airbox-to-surge tank rubber JOINT TUBE. for all XJ650 Turbo models. Use 1 per bike. Each:
$ discontinued

HCP26133 Aftermarket airbox-to-surge tank rubber JOINT TUBE. for all XJ650 Turbo models. Use 1 per bike. Each:
$ 24.95


HCP7225 OEM joint tube metal RING CLAMP, for all XJ650 Turbo models, black finish, includes the cinching screw. Secures both sides of the HCP7224 or HCP26133 rubber joint tube to the surge tank and to the airbox. Each:
$ 13.95

HCP26131 Aftermarket joint tube metal RING CLAMP, for all XJ650 Turbo models, black finish, includes the cinching screw. Secures both sides of the HCP7224 or HCP26133 rubber joint tube to the surge tank and to the airbox. Each:
$ 10.95


HCP21563 Aftermarket surge tank-to-carb rubber BOOT, exact reproduction of the original, for all XJ650 Turbo models, each:
$ 27.95

HCP21563SET4 Aftermarket surge tank-to-carb rubber BOOTS, set of 4:
$ 99.95



HCP7220 OEM surge tank-to-carb rubber boot metal RING CLAMP, for all XJ650 Turbo models, black finish as original, includes the cinch screw, each:
$ 12.95

HCP7220SET4 OEM airbox surge tank-to-carb rubber boot metal RING CLAMPS, set of 4:
$ 44.95


HCP16431 Aftermarket surge tank-to-carb rubber RING CLAMP, for all XJ650 Turbo models, black finish as original, includes the cinch screw, each:
$ 10.95

HCP16431SET4 Aftermarket surge tank-to-carb rubber RING CLAMPS, set of 4:
$ 39.95




HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



Surge Tank-to-Carb Boots and Hardware:

HCP21563 Aftermarket surge tank-to-carb rubber BOOT, exact reproduction of the original, for all XJ650 Turbo models, each:
$ 27.95

HCP21563SET4 Aftermarket surge tank-to-carb rubber BOOTS, set of 4:
$ 99.95


HCP7220 OEM surge tank-to-carb rubber boot metal RING CLAMP, for all XJ650 Turbo models, black finish as original, includes the cinch screw, each:
$ 12.95

HCP7220SET4 OEM airbox surge tank-to-carb rubber boot metal RING CLAMPS, set of 4:
$ 44.95

HCP7220SET8 OEM airbox surge tank-to-carb rubber boot metal RING CLAMPS, set of 8:
$ 87.95


HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95

HCP566SET8 OEM airbox rubber boot metal RING CLAMPS, set of 8:
$ 114.95


HCP16431 Aftermarket surge tank-to-carb rubber RING CLAMP, for all XJ650 Turbo models, black finish as original, includes the cinch screw, each:
$ 12.95

HCP16431SET4 Aftermarket surge tank-to-carb rubber RING CLAMPS, set of 4:
$ 49.95

HCP16431SET8 Aftermarket surge tank-to-carb rubber RING CLAMPS, set of 8:
$ 94.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XJ700 air-cooled models:

HCP849 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all air-cooled XJ700 non-X models, each:
$ 29.95

HCP849SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 109.95



HCP565 OEM airbox rubber boot metal RING CLAMP, for all XJ550, XJ650 (except Turbo), all XJ700 air-cooled, and all XJ750 air-cooled models, black finish as original, includes the cinching screw, each:
$ 11.95

HCP565SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 46.50


HCP16432 Aftermarket airbox rubber boot metal RING CLAMP, for all XJ550, 1992-98 XJ600 Seca II, 1992-2002 XJ600 Euro, XJ650 (except Turbo), XJ700 air-cooled, and all XJ750 air-cooled models, black finish, includes the cinching screw, each:
$ 10.95

HCP16432SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95




HCP6649 Aftermarket airbox boot ring clamp CINCH SCREW, panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per airbox clamp on all XJ550, all XJ650 (except Turbo), XJ700 non-X, and XJ750 non-X models. Each:
$ 1.25

HCP6649SET4 Aftermarket airbox boot ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6650 Aftermarket airbox boot ring clamp CINCH SCREW, panhead, phillips drive, bright 18-8 stainless steel. Use 1 per airbox clamp on all XJ550, all XJ650 (except Turbo), XJ700 non-X, and XJ750 non-X models. Each:
$ 1.95

HCP6650SET4 Aftermarket airbox boot ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP21415 Aftermarket airbox boot ring clamp SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per airbox clamp on all XJ550, all XJ650 (except Turbo), XJ700 non-X, and XJ750 non-X models. Each:
$ 1.50

HCP21415SET4 Aftermarket airbox boot ring clamp SCREWS, set of 4:
$ 5.75


HCP6653 Aftermarket airbox boot ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per airbox clamp on all XJ550, all XJ650 (except Turbo), XJ700 non-X, and XJ750 non-X models. Each:
$ 1.50

HCP6653SET4 Aftermarket airbox boot ring clamp CINCH SCREWS, set of 4:
$ 5.75


HCP6652 Aftermarket airbox boot ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per airbox clamp on all XJ550, all XJ650 (except Turbo), XJ700 non-X, and XJ750 non-X models. Each:
$ 1.50

HCP6652SET4 Aftermarket airbox boot ring clamp CINCH SCREWS, set of 4:
$ 5.75




XJ700-X water-cooled and XJ750-X water-cooled models:

HCP561 OEM airbox-to-carb rubber BOOT, for all water-cooled XJ700-X and XJ750-X models, each:
$ 29.95

HCP561SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ 109.95


HCP1206 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all water-cooled XJ700-X and XJ750-X models, each:
$ 24.95

HCP1206SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 89.95



HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95


HCP16431 Aftermarket airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1987-88 FZ600, 1986-89 XJ600, XJ650 Turbo (surge tank-to-carb boots), XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, black finish as original, includes the cinching screw, each:
$ 12.95

HCP16431SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 49.95


These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



XJ750 air-cooled models:

HCP562 OEM airbox-to-carb rubber BOOT, for all XJ750 air-cooled engines except 1984 XJ750RL or XJ750 E-II models, each:
$ discontinued

HCP562SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ discontinued


HCP1207 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XJ750 air-cooled engines except 1984 XJ750RL or XJ750 E-II models, each:
$ 29.95

HCP1207SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 109.95



HCP13421 OEM airbox-to-carb rubber BOOT, for all 1984 XJ750RL and XJ750E-II models, each:
$ discontinued

HCP13421SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ discontinued


HCP25881 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all 1984 XJ750RL and XJ750E-II models, each:
$ 34.95

HCP25881SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 129.95



HCP565 OEM airbox rubber boot metal RING CLAMP, for all XJ550, XJ650 (except Turbo), all XJ700 air-cooled, and all XJ750 air-cooled models, black finish as original, includes the cinching screw, each:
$ 11.95

HCP565SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 46.50


HCP16432 Aftermarket airbox rubber boot metal RING CLAMP, for all XJ550, 1992-98 XJ600 Seca II, 1992-2002 XJ600 Euro, XJ650 (except Turbo), XJ700 air-cooled, and all XJ750 air-cooled models, black finish, includes the cinching screw, each:
$ 10.95

HCP16432SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 39.95




These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6061 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6061SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6062 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.95

HCP6062SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6063 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.25

HCP6063SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6064 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel, original small-head JIS screw. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 2.95

HCP6064SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 11.25


HCP6646 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2891, HCP2894, or HCP24034 clamps. Each:
$ 1.50

HCP6646SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6648 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.25

HCP6648SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.75


HCP6649 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6649SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6650 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6651 Aftermarket ring clamp CINCH SCREW, original small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 2.95

HCP6650SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 10.95


HCP21415 Aftermarket ring clamp CINCH SCREW, button head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP21415SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6653 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6653SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6652 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP565, HCP2892, HCP2893, HCP7203, HCP7220, HCP7222, HCP7223, HCP7225, HCP16432, HCP22349, HCP26131, or HCP26132 clamps. Each:
$ 1.50

HCP6652SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XJ900RK, RL, N/FN, and F models:

HCP563 OEM airbox-to-carb rubber BOOT, for all XJ900RK, RL, N/FN, and F models, each:
$ 29.95

HCP563SET4 OEM airbox-to-carb rubber BOOTS, set of 4:
$ 114.95


HCP1208 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XJ900RK, RL, N/FN, and F models, each:
$ 26.95

HCP1208SET4 Aftermarket airbox-to-carb rubber BOOTS, set of 4:
$ 99.95



HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95


HCP16431 Aftermarket airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1987-88 FZ600, 1986-89 XJ600, XJ650 Turbo (surge tank-to-carb boots), XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, black finish as original, includes the cinching screw, each:
$ 12.95

HCP16431SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 49.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



XJ1100 models:

HCP850A OEM airbox-to-carb rubber BOOT, fits on the #1 carb (far left) only on all XJ1100 models, each:
$ discontinued

HCP850B OEM airbox-to-carb rubber BOOT, fits on the #2 carb (inner left) only on all XJ1100 models, each:
$ discontinued

HCP850C OEM airbox-to-carb rubber BOOT, fits on the #3 carb (inner right) only on all XJ1100 models, each:
$ discontinued

HCP850D OEM airbox-to-carb rubber BOOT, fits on the #4 carb (far right) only on all XJ1100 models, each:
$ discontinued


HCP851A Aftermarket Air Cleaner Box-to-Carb Rubber BOOT, exact reproduction of the original, for all XJ1100 models for the #1 (left outer) carb position, each:
$ 34.95

HCP851B Aftermarket Air Cleaner Box-to-Carb Rubber BOOT, exact reproduction of the original, for all XJ1100 models for the #2 (left inner) carb position, each:
$ 34.95

HCP851C Aftermarket Air Cleaner Box-to-Carb Rubber BOOT, exact reproduction of the original, for all XJ1100 models for the #3 (right inner) carb position, each:
$ 34.95

HCP851D Aftermarket Air Cleaner Box-to-Carb Rubber BOOT, exact reproduction of the original, for all XJ1100 models for the #4 (right outer) carb position, each:
$ 34.95


HCP851 Aftermarket Air Cleaner Box-to-Carb Rubber BOOTS SET, exact reproduction of the original, for all XJ1100 models, contains 1 each of all 4 boots.
$ 129.95



HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95


HCP16431 Aftermarket airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1987-88 FZ600, 1986-89 XJ600, XJ650 Turbo (surge tank-to-carb boots), XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, black finish as original, includes the cinching screw, each:
$ 12.95

HCP16431SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 49.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




XS1100 models:

HCP25386 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XS1100 models, fits on the #1 carb (far left) only, each:
$ 14.95

HCP25387 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XS1100 models, fits on the #2 or #3 carbs (center two cylinders) only, each:
$ 14.95

HCP25388 Aftermarket airbox-to-carb rubber BOOT, exact reproduction of the original, for all XS1100 models, fits on the #4 carb (far left) only, each:
$ 14.95

HCP25389 Aftermarket airbox-to-carb rubber BOOTS, for all XS1100 models, set of 4:
$ 49.95



HCP566 OEM airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, bright plated finish (some models originally used black clamps). Although not the correct black finish and style, these clamps will also fit the XJ650 Turbo models for the surge tank-to-carb boots. Includes the cinching screw, each:
$ 14.95

HCP566SET4 OEM airbox rubber boot metal RING CLAMPS, set of 4:
$ 57.95


HCP16431 Aftermarket airbox rubber boot metal RING CLAMP, for all 1984-85 FJ600, 1987-88 FZ600, 1986-89 XJ600, XJ650 Turbo (surge tank-to-carb boots), XJ700-X, XJ750-X, XJ900RK, RL, N/FN, and F models, XJ1100, and XS1100 models, black finish as original, includes the cinching screw, each:
$ 12.95

HCP16431SET4 Aftermarket airbox rubber boot metal RING CLAMPS, set of 4:
$ 49.95



These aftermarket metal ring clamp CINCH SCREWS, correct size and length cinch screws are available in a variety of styles and finishes to replace your rusty or destroyed originals. NOTE: all of the ring clamps that we sell are already furnished with their original style, phillips-drive cinch screws.

HCP6659 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.25

HCP6659SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6660 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6660SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP26505 Aftermarket ring clamp CINCH SCREW, standard large-head black-oxide, alloy steel, panhead phillips-drive screw. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP25605SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6661 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.95

HCP6661SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 6.95


HCP6662 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 4.95

HCP6662SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 16.95


HCP6664 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6664SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6663 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, black-oxide coated alloy steel. Use 1 per clamp on the HCP566 or HCP24030 clamps. Each:
$ 1.50

HCP6663SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95



HCP6654 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.25

HCP6654SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 4.95


HCP6655 Aftermarket ring clamp CINCH SCREW, original style small-head JIS panhead, phillips drive, zinc-plated bright alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.95

HCP6655SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 7.50


HCP6656 Aftermarket ring clamp CINCH SCREW, standard large-head panhead, phillips drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6656SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6657 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive black-oxide coated alloy steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6657SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95


HCP6658 Aftermarket ring clamp CINCH SCREW, socket head, hex-drive, bright 18-8 stainless steel. Use 1 per clamp on the HCP2889, HCP16430, or HCP16431 clamps. Each:
$ 1.50

HCP6658SET4 Aftermarket ring clamp CINCH SCREWS, set of 4:
$ 5.95




AIRBOX DRAIN AND BREATHER HOSES, PINCH CLAMPS:

Your airbox DRAIN HOSE come off a small plastic fixed nipple port on the bottom side of the airbox or air cleaner housing, and the hose normally runs straight down, towards the ground.....serving to provide a "lowest point" exit for any water or overflow fuel (in case of leaking or stock float needle valves in the carbs).

The crankcase-to-airbox BREATHER HOSE normally runs from a pivoting, large plastic nipple port that is centrally located on the front of the airbox, and runs either to a crankcase breather port (XJ550 and XJ1100 models) or to a port on the upper rear of the shifter cover (XJ650, XJ700, XJ750, and XJ900RK models). This hose carries the unburned fuel and oil vapors from the crankcase, back to the air filter housing, allowing introduction of such fumes into the intake air stream to be burned rather than vented to the atmosphere.

Owners of bikes who have added "pod" air filters will require the use of either a custom fabricated crankcase vent system to move these fumes to the pod filters, or a exit vent/filter system to capture such fumes.


Airbox Drain Hoses and Clamps:

Airbox drain hose routing and length:

- on all XJ550 models, the original is approximately 4" long and hangs straight down off the airbox drain port.

- on all 1980-81 XJ650 models, the original is approximately 8" long and hangs straight down off the airbox drain port.

- on all 1982-4 XJ650 (except Turbo) models, and all 1981-83 XJ750 models, the original hose is approximately 12" long and is routed from airbox drain port straight down and through a band-clamp on frame cross tube.

- on all XJ700, 750-X, XJ750RL, and XJ900 models the original hose is approximately 14" long and is routed from airbox drain port straight down to a welded clamp on frame cross tube, where battery vent tube also lives.

- on XJ1100 models the original hose is approximately 12" long and is routed from airbox drain port, makes a 90-degree forward turn, then a 90-degree downward turn, and then goes straight down where it passes through a welded-on clip on the front of the lower frame cross-tube and then hangs down, towards the ground.


HCP5458 OEM airbox fluid DRAIN HOSE, for all XJ550, 1984-85 FJ600, and 1980-81 XJ650 Maxim and Midnight Maxim models, 9" long section. This hose hangs straight down under the airbox. Use the HCP2945 or HCP16427 hose clamp with this hose.
$ 6.95

HCP7347 OEM airbox fluid black rubber DRAIN HOSE, for all 1982-84 XJ650 (except Turbo) models, and all XJ700, XJ750, XJ900RK, and XJ1100 models, black, 15" long, cut to length as needed
$ 17.95

HCP4926 Aftermarket airbox fluid transparent vinyl CLEAR DRAIN HOSE, for all XJ550, 1984-85 FJ600, XJ650 (except Turbo), XJ700, XJ750, XJ900, and XJ1100 models. Use the HCP122 or HCP16428 hose clamp with this hose. Sold per foot. You will need to cut to the proper length needed for your particular model.
$ 5.95

HCP4924 Aftermarket airbox fluid standard-grade black rubber DRAIN HOSE, for all XJ550, 1984-85 FJ600, XJ650 (except Turbo), XJ700, XJ750, XJ900, and XJ1100 models. Use the HCP122 or HCP16428 hose clamp with this hose. Sold per foot. You will need to cut to the proper length needed for your particular model.
$ 7.95

HCP4910 Aftermarket airbox fluid DRAIN HOSE, for all XJ550, 1984-85 FJ600, XJ650 (except Turbo), XJ700, XJ750, XJ900, and XJ1100 models. Translucent red color as original. Use the HCP122 or HCP16428 hose clamp with this hose. Sold per foot. You will need to cut to the proper length needed for your particular model.
$ 6.95

HCP948 Aftermarket airbox fluid premium-grade grey rubber DRAIN HOSE, for all XJ550, 1984-85 FJ600, XJ650 (except Turbo), XJ700, XJ750, XJ900, and XJ1100 models. Use either the HCP122, HCP16428, or the HCP3106 pinch clamp with this fuel line. Sold per foot. You will need to cut to the proper length needed for your particular model.
$ 9.95



fl8) OEM and aftermarket drain hose CLAMPS.

WIRE clamps tend to be easier to install and remove, but produce much less tension and over a much lesser area.

BAND clamps provide better tension and security, but generally require more difficulty in install and remove, and may require the use of pliers, etc.


HCP122 OEM airbox fluid drain hose WIRE CLAMP, correct fit for the HCP948, HCP4910, HCP4924, or HCP4926 drain hoses, use 1 per hose. Each:
$ 3.95

HCP16428 Aftermarket airbox fluid drain hose WIRE CLAMP, correct fit for the HCP948, HCP4910, HCP4924, or HCP4926 drain hoses, use 1 per hose. Same style clamp as the original HCP122 above. Each:
$ 2.95

HCP24883 Aftermarket airbox fluid drain hose BAND CLAMP, correct fit for the HCP948, HCP4910, HCP4924, or HCP4926 drain hoses, use 1 per hose. Can be used to replace the HCP122 wire-style clamp above. Each:
$ 2.95


HCP3106 Aftermarket airbox fluid drain hose WIRE CLAMP, will fit the HCP948 drain hose, use 1 per hose. Each:
$ 2.95

HCP24906 Aftermarket airbox fluid drain hose BAND CLAMP, can be used to replace the HCP3106 wire-style clamp above. Each:
$ 2.95


HCP2945 OEM airbox fluid drain hose WIRE CLAMP, correct fit for the HCP5458 and HCP7347 drain hoses, use 1 per hose. Bright plated. NOTE: Midnight Maxim models originally used a black-plated version of this same clamp, which is no longer available.
$ 3.95

HCP16427 Aftermarket airbox fluid drain hose WIRE CLAMP, correct fit for the HCP5458 and HCP7347 drain hoses, use 1 per hose. Bright plated. Same style clamp as the original HCP2945 above. NOTE: Midnight Maxim models originally used a black-plated version of this same clamp, which is no longer available.
$ 2.95

HCP24920 Aftermarket airbox fluid drain hose BAND CLAMP, correct fit for the HCP5458 and HCP7347 drain hoses, use 1 per hose. Bright plated. Can be used to replace the HCP2945 wire-type clamp above.
$ 2.95




Crankcase-to-Airbox Breather Hose and Clamps:

HCP8046 OEM crankcase vapor breather hose PORT, black plastic swiveling port fits into the airbox housing face. Fits all XJ700, XJ750-X, XJ750RL, and XJ900RK models.
$ 4.50


HCP9792 OEM crankcase vapor breather hose port rubber GROMMET, for where the plastic port fits into the airbox housing face. Fits all XJ650 (except Turbo models) and all XJ750 models.
$ 1.95

HCP9793 OEM crankcase vapor breather hose port rubber GROMMET, for where the plastic port fits into the airbox housing face. Fits all XJ700, XJ750-X, XJ750RL, and XJ900RK models.
$ 4.95



HCP9790 OEM crankcase vapor BREATHER HOSE, for all XJ550 and FJ600 models.
$ discontinued

HCP979 OEM crankcase vapor BREATHER HOSE, for all XJ700 and XJ750-X models.
$ discontinued

HCP980 OEM crankcase vapor BREATHER HOSE, for all XJ750 and all XJ900RK, RL, N/FN, and F models.
$ discontinued

HCP9789 OEM crankcase vapor BREATHER HOSE, for all XJ1100 models, attaches to the breather valve in the crankcase.
$ 16.95

HCP9787 OEM crankcase vapor BREATHER HOSE, for all XJ1100 models, attaches to the intake nipple port at the airbox.
$ discontinued



fl8) OEM and aftermarket breather hose CLAMPS.

WIRE clamps tend to be easier to install and remove, but produce much less tension and over a much lesser area.

BAND clamps provide better tension and security, but generally require more difficulty in install and remove, and may require the use of pliers, etc.


HCP983 OEM crankcase breather hose WIRE CLAMP, used with the above breather hoses as follows: all XJ550, FJ600, XJ700, and XJ1100 models, use 1 at both the breather pipe fitting end of the hose and the airbox fitting end of the hose; all XJ650, XJ750, and all XJ900RK, RL, N/FN, and F models use 1 at the shifter cover breather pipe fitting end of the hose only. Each:
$ 6.95

HCP24908 Aftermarket crankcase breather hose BAND CLAMP, used with the above breather hoses as follows: all XJ550, FJ600, XJ700, and XJ1100 models, use 1 at both the breather pipe fitting end of the hose and the airbox fitting end of the hose; all XJ650, XJ750, and all XJ900RK, RL, N/FN, and F models use 1 at the shifter cover breather pipe fitting end of the hose only. Can be used in place of HCP983 wire-style clamp above. Each:
$ 4.95


HCP3107 Aftermarket crankcase breather hose WIRE CLAMP, used with the above breather hoses as follows: all XJ550 and XJ700 models, use 1 at both the breather pipe fitting end of the hose and the airbox fitting end of the hose; all XJ650, XJ750, and XJ900RK models use 1 at the shifter cover breather pipe fitting end of the hose only. Each:
$ 2.95

HCP24889 Aftermarket crankcase breather hose BAND CLAMP, used with the above breather hoses as follows: all XJ550 and XJ700 models, use 1 at both the breather pipe fitting end of the hose and the airbox fitting end of the hose; all XJ650, XJ750, and XJ900RK models use 1 at the shifter cover breather pipe fitting end of the hose only. Can be used in place of HCP3107 wire-style clamp above. Each:
$ 2.95


HCP984 OEM crankcase breather hose BAND CLAMP, used with the above breather hoses as follows: all XJ650, XJ750, and all XJ900RK, RL, N/FN, and F models use 1 at the airbox breather fitting end of the hose only. Each:
$ 3.95

HCP24890 Aftermarket crankcase breather hose BAND CLAMP, used with the above breather hoses as follows: all XJ650, XJ750, and all XJ900RK, RL, N/FN, and F models use 1 at the airbox breather fitting end of the hose only. Can be used to replace original clamp HCP984 above. Each
$ 2.95



HCP982 OEM crankcase vapor breather hose PIPE FITTING, the barbed metal fitting that either presses into the crankcase (XJ550 and FJ600 models) or the top rear edge of the shifter side cover (all XJ650, XJ700, XJ750, and XJ900RK, RL, N/FN, and F models).
$ 12.95

HCP9788 OEM crankcase vapor BREATHER VALVE, presses into the crankcase, fits all XJ1100 models.
$ 19.95

HCP12789 OEM crankcase vapor breather valve cover GASKET, fits all XJ1100 models.
$ discontinued



HCP966 OEM crankcase vapor breather valve cover mounting BOLT, alloy-steel, zinc-plated allen head hex-drive screw, use 4 per cover on all XJ1100 models. Each:
$ 2.50

HCP22253 Aftermarket crankcase vapor breather valve cover mounting MOUNTING BOLT, alloy-steel, zinc-plated allen head hex-drive screw. Use 4 per cover on XJ1100 engines. Each:
$ 1.95

HCP228 Aftermarket crankcase vapor breather valve cover mounting MOUNTING BOLT, allen head hex-drive, black-oxide coated. Use 4 per cover on XJ1100 engines. Each:
$ 1.00

HCP2779 Aftermarket crankcase vapor breather valve cover mounting MOUNTING BOLT, allen head hex-drive, black-oxide finish, features self-locking threads. Use 4 per cover on XJ1100 engines. Each:
$ 2.50

HCP226 Aftermarket crankcase vapor breather valve cover mounting MOUNTING BOLT, allen head hex-drive, bright 18-8 stainless steel finish. Use 4 per cover on XJ1100 engines. Each:
$ 2.00
Return to Top of Page